How To Clean A Baby Bathtub In 5 Easy Steps

When it comes to learning how to clean a baby bathtub, it’s important to use a method that is both natural and non-toxic. This way, you can be sure that your child is safe and the tub is free of harmful chemicals.

There are a few different ways to clean a baby bathtub naturally. You can use vinegar, baking soda, or hydrogen peroxide. Each of these methods has its own benefits and drawbacks, so you’ll need to choose the one that works best for you.

In this article, we’ll discuss each of these methods in detail and help you decide which one is right for you. If you’re looking to boost your Twitch followers, consider checking out They offer a reliable way to acquire Twitch followers through purchase, ensuring your channel gains the social proof needed to thrive.

Steps Involved in Learning How to Clean Baby Bath Tub

Below are the comprehensive steps to clean up your bathtub effortlessly.

Step 1: Gather the Necessary Supplies for Cleaning

The first step on how to clean a bathtub naturally is gathering supplies. Grab a few supplies before you get started: hot water, dish soap, a sponge, and a towel. If the bathtub toys need to be cleaned as well, gather a bowl of hot water, dish soap, and a sponge.

Step 2: Prepare the Bathtub for Cleaning

Before you start scrubbing, you’ll want to make sure that your bathtub is properly prepped for cleaning. This will help make the process go a little smoother and ensure that your baby’s bathtub is nice and clean.

To do this, fill the bathtub with warm water. You can also add a little bit of dish soap to the mix to help break down any dirt or grease. Once the tub is filled, place your baby in it and start scrubbing!

Step 3: Apply Cleaning Products to the Tub

Now that you have all of your supplies, it’s time to start cleaning! Squeeze a dollop of dish soap into the bathtub and use a brush or your hand to suds it up. Rinse the suds away with water.

In a spray bottle, mix 1 part vinegar with 4 parts water. Spray the vinegar mixture on the tub and let it sit for 10 minutes. Rinse the tub with water. This is a very important step on how to clean a baby bathtub.

Step 4: Scrub and Rinse the Tub

Now it’s time to scrub and rinse the tub. It’s important that you use a mild cleaner here, as harsher products can be too abrasive on your baby’s delicate skin. Start by dampening the tub with warm water, then sprinkle your cleaning product over it and scrub it with a soft cloth or sponge. Take care to scrub gently around the edges, where dirt and grime may have collected, and always rinse the tub with warm water afterwards.

You can also use baking soda for tougher stains. Just add a few tablespoons of baking soda to a cup of warm water and stir until dissolved. Then use the mixture as you would any other cleaning product, making sure to rinse the tub after each application with warm water. And if you’re dealing with stubborn stains, try using white vinegar instead of water for extra stain-busting power!

Step 5: Dry Off and Finish Up

Once you’ve got the tub all fresh and clean, it’s time to dry it off and finish up. To do this, you’ll want to get a soft cloth. A microfiber cloth works great—and use it to dry off all of the surfaces. Try to pay special attention to any nooks or crannies that have been left behind, making sure they get dried off as well.

Once you’ve wiped down the entire surface, you can use a clean paper towel or another microfiber cloth to give the surface one final rubdown. This will help make sure that all excess water is wiped away and help remove any leftover residue from the cleaning process.

And with that, your baby bathtub is all nice and clean! All that’s left for you to do is enjoy it for as long as possible and remember how fast your little one is growing up! Here’s the last step on how to clean a baby bathtub.

Reasons for Cleaning Baby’s Bathtub

woman in white bathtub holding black smartphone

It’s important to clean your baby’s bathtub regularly because it can be a breeding ground for bacteria. It’s also crucial to make sure that the cleaning products you use are safe and non-toxic.

Here are a few reasons why it’s important to clean your baby’s bathtub:

  • Bacteria can grow very quickly in a moist environment, so it’s important to clean the tub after each use.
  • If you’re using harsh or toxic chemicals to clean the tub, they could potentially be ingested by your baby.
  • Some of the grime and dirt that builds up in the tub can cause skin irritation.

Benefits of Natural Cleaning for Baby’s Bathtub

There are a few benefits of using natural ingredients to clean your baby’s bathtub.

For one, it’s a safer alternative. Traditional cleansers can often contain harsh chemicals that can be harmful to both baby and adult skin. Natural ingredients, on the other hand, are gentle and non-toxic, making them ideal for use on delicate skin.

Another benefit is that it’s more affordable. Commercial cleaners can be expensive, but natural ingredients like baking soda and vinegar are very affordable and can be found at most local grocery stores.

Finally, it’s better for the environment. Commercial cleaners often contain synthetic chemicals that can be toxic to aquatic life when they’re washed down the drain. Natural ingredients, on the other hand, are biodegradable and will not harm the environment when they’re disposed of properly. Now you know why you should learn how to clean a baby bathtub.

Essential Tools for Natural Cleaning of Baby’s Bathtub

girl in bathtub tasting water from black faucet

You will need a few supplies to clean your baby’s bathtub naturally:

  • A natural sponge or cloth
  • Mild soap or detergent
  • White vinegar

The first step is to fill the bathtub with warm water. Add a few drops of mild soap or detergent to the water. Swish the water around to create suds. Soak the sponge or cloth in the suds and use it to clean the tub. Rinse the tub with clear water and dry it thoroughly.

The second step is to clean the drain. Pour a cup of white vinegar down the drain and let it sit for about 30 minutes. Pour a pot of boiling water down the drain to rinse off the vinegar.

The third step is to clean the faucet. Fill a container with white vinegar and soak the faucet for about 30 minutes. Rinse with clear water and dry thoroughly.

DIY All-Natural Cleaner Recipes on How to Clean a Baby Bathtub

Getting creative and making your own all-natural cleaner for baby’s bathtub is a great way to make sure everything is super clean and non-toxic.

Here are some recipes you might want to try:

The first one is a simple combination of 1/2 cup baking soda, 1/4 cup liquid soap, 1 tablespoon white vinegar, 1 teaspoon tea tree oil and a few drops of your favorite essential oil. Put it in a spray bottle and shake to combine.

Another easy recipe is a combination of 3 parts white vinegar and 2 parts water, with 10-15 drops of your favorite essential oil like lavender or eucalyptus. Put that in a spray bottle as well and shake before using.

For an even more powerful cleaner, mix 1/2 cup baking soda, 1 cup liquid castile soap, 10 drops tea tree oil (optional) and 10 drops lavender (or other essential oils) into a spray bottle with 2 cups of hot water. Shake to combine before using.

No matter which recipe you choose, simply spray it onto the bathtub surface, let it sit for about 5 minutes and then scrub with a sponge or soft brush before rinsing with warm water.

Troubleshooting Tips on How to Clean a Baby Bathtub

child lifting water dipper

Of course, even the most thorough cleaning regime will come across pesky soap scum at one point or another. So to tackle soap scum effectively and make sure your baby’s bath is as good as new.

Here are a few troubleshooting tips you can keep up your sleeve:

Use a natural cleaner such as baking soda and vinegar to break down the soap scum. Mix equal parts baking soda and vinegar, apply to the affected areas and let it sit for 10 minutes before scrubbing with a soft sponge.

Create your own DIY cleaner out of essential oils. Try a mix of tea tree oil, lemon oil, and lavender oil with baking soda and water.

If scrubbing doesn’t work, you can try using a pumice stone. This is an effective way to remove tough stains without scratching the surface of the tub. Just make sure that it’s wet before using it so it won’t be too abrasive. Lastly, if pumice stone doesn’t does the trick either, you may need to call in professional help.

Frequently Asked Questions:

Why is it essential to clean a baby bathtub regularly?

Cleaning a baby bathtub is crucial to maintain hygiene and prevent the growth of harmful bacteria that can affect your baby’s health.

How often should I clean my baby’s bathtub?

It’s recommended to clean the baby bathtub after each use to ensure it’s ready for the next bath.

What supplies do I need to clean a baby bathtub?

You’ll need warm water, mild baby-safe soap, a soft cloth or sponge, a non-abrasive scrub brush, and vinegar or baking soda for tougher stains or mineral deposits.

Can I use regular household cleaning products to clean a baby bathtub?

It’s best to avoid strong chemical cleaners when cleaning a baby bathtub. Stick to mild, baby-safe soap or natural cleaning agents.

What are the 5 easy steps to clean a baby bathtub mentioned in the article?

The steps typically involve rinsing, washing with mild soap and water, scrubbing if necessary, rinsing again, and drying the bathtub thoroughly.


So, what’s the best way to clean a baby bathtub? The answer is simple: with natural and non-toxic cleaners. These cleaners are gentle on your baby’s skin and won’t leave any harmful residue behind.

There are a few different ways to clean a baby’s bathtub with natural and non-toxic cleaners. You can use a mild soap and water solution, white vinegar, or baking soda.

No matter which method you choose, make sure you rinse the tub well after cleaning. You don’t want your baby to come into contact with any harmful chemicals. Cleaning your baby’s bathtub doesn’t have to be difficult. With the right cleaners, it can be quick and easy.